Tripe Slicing Machine Model LT100

Suitable to cut beef and sheep stomachs in strips. The machine is completely made in AISI 304 stainless steel and it is supplied with a control panel with a stainless steel cabinet. The working cycle consists of manual loading, slicing into 6mm width strips with variable-lengths and automatic discharging of the animal byproduct.
 

 
Technical Specifications

 

Technical Characteristics
Capacity/h 2000kg (Tripes)
Installed power V 400 2.6 KW
Cold water consumption/h 0.7m³/h

To view detailed technical specifications please click on the link below:
 

 

Tripe Slicing Machine Model LT2008

Suitable to cut beef and sheep stomachs in strips. The machine is completely made in AISI 304 stainless steel and it is supplied with a control panel with a stainless steel cabinet. The working cycle consists of manual loading, slicing into 6mm width strips with variable-lengths and automatic discharging of the animal byproduct.
 

 
Technical Specifications
Technical Characteristics
Capacity/h 2000kg (Tripes)
Installed power V 400 2.6 KW
Weight 500kg

To view detailed technical specifications please click on the link below:

 

Washing-Desalting Machine Model LD-100

The gut washing-desalting machine is completely built in AISI 316 – 304 stainless steel and suitable to wash, desalinate and dry the raw material, after it is loaded into the machine by a tilt lifter. This process can be executed simultaneously or according to separate phases. The processing time of each working phase is adjustable by means of a timer. The speed and the rotation mode of the rotating drum can be customized. The machine is also equipped with an automatic system for water recycling and salt recovery.

 
Technical Specifications
Technical Characteristics
Installed power V 400 Kw 4.0
Capacity per load 300kg

To view detailed technical specifications please click on the link below:
 

 

Bung Inverter Model 8-A

The bung (or beef ceacum) inverter is made from an AISI 304 stainless steel framework, on which a cylindrical tank is mounted on. Inside the tank, a suction pump creates a drop in pressure. When the bung (or beef ceacum) is inserted on the reversal duct, it gets sucked inside the tank, and, at the same time, it gets inverted. The tank reclines to allow for discharging the animal byproducts and is equipped with a manual or pneumatic door, depending on the needs of the purchaser. The machine is equipped with an electric panel with low tension 24 V push-buttons.

 
Technical Specifications

 

Technical Characteristics
Capacity/h up to 1800 bungs
Installed power 480v,60Hz 2.60 KW

To view detailed technical specifications please click on the link below:
 

 

Nail Remover Machine Model 400

Completely stainless steel made; simple and stout;
easily cleaned and operated. Devices on machine make it safe for the operator. Its is supplied with:

  • Movable work pedal.

  • Electric control board.

  • Safety devices required by the
    regulations in force.

 
Technical Specifications


To view detailed technical specifications please click on the link below:
 

 
 

Stomach Opening Machine Model MAS

The machine is made entirely of stainless steel. The stomachs are manually inserted into the machine where the stomachs are split and pre-washed. This machine includes a hopper to recover any waste material and an electric control panel with a stainless steel cabinet and low tension 24 V push-buttons.

 
Technical Specifications

 

Technical Characteristics
Capacity/h 1000 Stomachs weighing 0.6 kg each
Installed power V 400 Kw 0.55
Cold water consumption/h 0.7m³/h

To view detailed technical specifications please click on the link below: